该机用于测定未硫化橡胶的特性，找出胶料的*适合硫化时间。该机采用进口智能数字式温控仪表，调整设定简便，控温范围宽，控制精度高，其稳定性、重现性及准确性均优于*般有转子硫化仪。橡胶硫化、黏弹性测试仪 技术参数：
1、模子型态-密闭型模具：M2000FA以密封圈隔*模心与外框，上下模可完全密闭
2、模子型态-开放型模具：2000F可精确、自由调整上下模间隙
3、制造规范：ASTM-D5289， ISO-6502， GB-T16584
4、温度控制：电脑连线控制，PID.SSR控制，控制范围：室温~200℃
5、温度精确度：温度误差±0.3℃，温度*小读值0.1℃
6、升温速度：室温~190℃＜8
7、改变温度所需时间：175℃~190℃＜4' 190℃~175℃＜4' 50"
8、振动频率：100cpm（1.66Hz），采用伺服马达驱动
9、发泡力范围：P,1~1000kg 可选择电脑自动切换或自行设定
10、扭距范围：弹性, 1~200 lb-in/崵性, 0.3~200 lb-in，可选择电脑自动切换或自行设定
11、压力单位：N， dN， Kg， lb， N， N/m2， kg/ cm2， lb/ in2， kpsi
12、扭距单位：kg-cm， lb-in， N-m
13、扭距及压力*小读值：0.001单位
16、电 源：1∮，AC220V±10﹪，50/60Hz±3Hz， 10A
17、气 压：4.6kg/ cm2（0.46MPA）客户自备
18、试料体积：约 5 cm3
19、体积-主机（密闭型模具： 660×660×1240mm （W×D×H）
20、体积-主机（开放型模具）：660×660×1150mm（W×D×H）
21、体积-主机柜： 600×600×750mm（W×D×H）
22、体积-电脑装配柜：550×600×1510mm（含列表机 including the printer）
23、总重量-密闭型模具：399 kg
24、总重量-开放型模具：393 kg
25、标准配备：电脑系统*套（含彩色萤幕，硬碟各*个及彩色喷墨列表机*台）
用途：
硫化仪除用於测定橡胶硫化、黏弹性之特性外，更提供了侦测发泡橡胶，发泡之过程，本机所提供的各项曲线及数据，是改良制品、量产条件及研发新配料*重要的依据。
功能特点：
采用计算机控制和接口板进行数据的采集、保存、处理和打印试验结果，使功能更加强大。充分显示了其高度自动化的特点。还具有曲线比较、放大等功能。
This machine is used to measure the characteristics of unvulcanized rubber and find the most suitable vulcanization time for the rubber material. This machine adopts an imported intelligent digital temperature control instrument, which is easy to adjust and set, has a wide temperature control range, high control accuracy, and its stability, reproducibility, and accuracy are better than general rotor vulcanization instruments.
Technical parameters:
1. Mold type - closed mold: M2000FA uses sealing rings to isolate the mold core and outer frame, and the upper and lower molds can be completely sealed
2. Mold type - open mold: 2000F can accurately and freely adjust the gap between the upper and lower molds
3. Manufacturing specifications: ASTM-D5289, ISO-6502, GB-T16584
4. Temperature control: computer wiring control, PID SSR control, control range: room temperature~200 ℃
5. Temperature accuracy: temperature error ± 0.3 ℃, minimum temperature reading 0.1 ℃
6. Heating rate: room temperature~190 ℃ ＜ 8
7. Time required to change temperature: 175 ℃~190 ℃ ＜ 4 '190 ℃~175 ℃ ＜ 4' 50“
8. Vibration frequency: 100cpm (1.66Hz), driven by a servo motor
9. Foaming force range: P, 1~1000kg, can be automatically switched by computer or set by oneself
10. Torque range: elastic, 1-200 lb-in/per sex, 0.3-200 lb-in, can be automatically switched by computer or set by oneself
11. Pressure unit: N, dN, Kg, lb, N, N/m2, kg/cm2, lb/cm2, kpi
12. Torque unit: kg cm, lb in, N-m
13. Minimum reading of torque and pressure: 0.001 units
16. Power supply: 1 Å, AC220V ± 10%, 50/60Hz ± 3Hz, 10A
17. Air pressure: 4.6kg/cm2 (0.46MPA) provided by the customer
18. Sample volume: approximately 5 cm3
19. Volume - Host (closed mold: 660 × six hundred and sixty × 1240mm (W × D × H)
20. Volume Host (Open Mold): 660 × six hundred and sixty × 1150mm (W × D × H)
21. Volume - Main Cabinet: 600 × six hundred × 750mm (W × D × H)
22. Volume - Computer Assembly Cabinet: 550 × six hundred × 1510mm (including the printer)
23. Total weight - closed mold: 399 kg
24. Total weight - open mold: 393 kg
25. Standard equipment: One set of computer system (including one color screen, one hard drive, and one color inkjet printer)
Purpose:
In addition to measuring the vulcanization and viscoelasticity characteristics of rubber, the vulcanizer also provides detection of foaming rubber and the foaming process. The various curves and data provided by this machine are the most important basis for improving products, mass production conditions, and developing new ingredients.
Functional features:
Using computer control and interface boards for data collection
部分产品介绍：
硫化橡胶耐电压强度试验仪/符合国标GB/T1408-2006、ASTMD149
体积表面电阻率测试仪/符合国标GB/T1410-2006、ASTMD257-99
介电常数介质损耗测试仪/符合国标GB/T1409-2006
塑料球压痕硬度测试仪/符合国标GB/T3398-2008
橡胶塑料摩擦磨损试验机/符合国标GB/T3960-1983
热变形维卡温度测定仪/符合国标GB/T8802-2001
熔体流动速率测定仪/符合国标GB/T3682-2000
水平垂直燃烧试验仪/符合国标GBGB/T5169.16-2002、ANSI/UL94
氧指数测定仪GB/T2406.2-2009GB/T2406.1-2008
垂直燃烧试验机符合国标GB/T18380.11-2008
门尼粘度试验机符合国标GB/T 1232、GB/T1233、ISO289、ISO667
维卡软化点测试仪符合国标GB/T 1633、GB/T1634、GB 8802
无转子硫化仪符合国标GB/T16584
QQ：1325426082 广告业务:
